The connection consists of a male adaptor and a female coupler, that when coupled forms a fixed Joint connecting pipe or hose together. They are quick and easy to use and require no tools to operate.
The quick disconnect couplings will remain joined together until both the handles are pulled upwards releasing the connection. Safety pins are provided to keep handles locked in place, they are not needed for most applications.
There is a recessed gasket already in place in the female coupler, which forms an air tight seal when connected with the male face.
Providing the information below will facilitate quick ordering. Place order by part number.
Determine the type of kamlock coupling from part number:For example: D200-SS = Female coupler - 2” size – Stainless Steel Body
Cam and groove couplings are the world’s most widespread quick connect coupler and our major product line. Pro Flow Dynamics is based in Southern California and has been supplying these fittings nationwide for over a decade since the company was established.
All our cam lock hose connectors are manufactured to the Approved Federal Standards (A-A59326/MIL-C-27487) making them compatible with all other cam couplings also made to spec., including PT Coupling and Dixon Coupling. We work closely with our manufacturers, who are ISO 9001 certified, and we can make custom parts and special orders.
We supply a full range of cam lock couplings the most which we stock in our warehouse. Special parts can be made to order and specialty parts as well as extra-large sizes (8”-12”) can be sourced from local suppliers for quicker delivery. We aim to ship the same day as the order is placed.
All our couplings are interchangeable with Dixon Camlock, Banjo Fittings and PT Coupling Cam and Groove fittings.
All Metal cam lever couplings come standard with Buna Nitrile. Poly Camlocks come with EPDM gaskets for greater acidic resistance.
Sizes ½” up to 6” are available for Aluminum, Brass and Stainless Steel. Polypropylene is supplied in sizes ½” up to 4”. All ½” kamlock fittings come standard with 2 handles for better performance.
Standard cam lever couplers operating pressure is specified at 150 psi for most sizes. Please see specifications page for detailed pressure rating for each size.
National Pipe Threads (NPT) designed to seal tight when threaded on to pipe. Hose barbs ends available for direct fit into hose.
The different types of Cam lock fittings (Standard Types)
We carry a full line of replacement Gaskets and handle, ring and pin assemblies for all sizes.
Used on pipes, hose, tubing, pumps and tanks carrying liquids and powders. Used in almost all industries where liquids and powders are transported, Such as Fuel and oil, Water, chemical, Paints and Dyes, Food & Beverage, adhesives, pharmaceutical, cleaning, agriculture and military and government bids among others.